Parker Chomerics THERM-A-GAP GELs are supplied as pre-cured, single component compounds that can be dispensed over the heat generating component. These unique gel materials result in much lower mechanical stress on delicate components than even the softest gap-filling pads. They are ideal for filling variable gaps between multiple components and a common heat sink.
Parker Chomerics commercial grade thermal insulator pads are designed for use where solid thermal and electrical properties are required at an economical price. These products are offered as dry pads, or with an optional adhesive (PSA) layer for attachment. Materials with PSA are available die-cut on continuous rolls. Versions are offered with either polyimide or fiberglass reinforcement to protect pads against tear, cut-through and punctures.
Parker Chomerics thermally conductive pad selection includes dielectric insulating pads for use as alternatives to greased mica insulators between discrete power devices and heat sinks. Also available are low-modulus, thermally conductive silicone and non-silicone gap filler pads for semiconductor applications where heat must be conducted over large, variant gaps between components and heat-dissipating surfaces.
Parker Chomerics thermal greases offer a range of performance options covering the simplest to the most demanding thermal requirements.These materials are screened, stenciled or dispensed and require virtually no compressive force to conform under typical assembly pressures. The excellent surface wetting results in low interfacial resistance.
Parker Chomerics EMI shielding elastomer gaskets come in sheets, extrusions, molded, and in custom sizes, and are the superior choice for elastomeric seals, corrosion resistance, environmental sealing, and cost effective electronic shielding.
Parker Chomerics robotically dispensed Form-In-Place (FIP) EMI shielding gaskets provide the lowest total cost of ownership for small cross section and complex pattern applications. Parker Chomerics CHOFORM (conductive) and ParPHorm (non-conductive) FIP materials can reduce installed cost of an EMI gasket by up to 60%.
Parker Chomerics product line family of SOFT-SHIELD EMI gaskets provides a selection of strip and sheet stock commercial EMI gasket solutions suitable for most all indoor EMI shielding and grounding a pplications. These products rely on the unique construction of a conductivity-plated fabric or wire mesh, wrapped or knitted over a low closure force urethane foam.
Parker Chomerics Fingerstock offers superior shielding for large compression ranges due to mounting surface variability.
Parker Chomerics offers one of the broadest selections of metal-based gasket solutions available anywhere for ElectroMagnetic Interference (EMI) and ElectroMagnetic Pulse (EMP) shielding as well as lightning strike protection. These products include three distinct families; knitted wire, oriented wire in silicone and expanded metal.
Parker Chomerics METALASTIC gaskets are a family of metal-based gasketing technologies available with or without elastomer binder. Material is produced in thin sheets that can be cut into custom geometries to meet application-specific needs.
Parker Chomerics family of EMI Shielding Paints are designed for application on a wide variety of surfaces for challenging environments when a conductive surface is desired. Adhesion to plastics and metals provides excellent EMI shielding. Integrated circuits can be EMI shielded at the board level utilizing high-performance paints.
Parker Chomerics family of CHO-BOND electrically conductive greases provides a variety of solutions for solving EMI problems beyond that which can be addressed simply with EMI gasketing.
Parker Chomerics family of shielded air ventilation panels consists of several product variations. Shielded air ventilation panels, also known as shielded honeycomb vent panels, provide adequate air flow for cooling purposes in electronic enclosures while preserving the necessary EMI shielding.
Parker Chomerics CHO-MUTE 9005 and 9025 elastomer based absorber materials are designed to offer a user- friendly approach to the reduction of unwanted electromagnetic radiation from electronic equipment as well as minimize cavity-to-cavity cross coupling and microwave cavity resonances. Comprised of a silicone elastomer matrix with ferrous filler material, these materials provide RF absorption performance over a broadband frequency range from 500 MHz to 18 GHz.
Parker Chomerics high quality flat cable jackets are designed to attenuate RF signals and bring digital electronic devices into EMC compliance at an attractive cost.
Parker Chomerics Duralan G, Duralan G XL, WIN-SHIELD G and WIN-SHIELD G Heaters are high- performance glass products that deliver superior clarity with ultra-low reflection. High performance AR coatings allow for maximum light transmission and crisp images. Incorporation of EMI shielding with ITO coatings with high transparency allow for unobstructed viewing. Duralan G XL products are used in digital signage applications for large format LCD systems for indoor or outdoor use.
Parker Chomerics EMI shielding film is a highly conductive optical quality polyester film used in display applications requiring EMI shielding and transparency. Use for simple shielding applications or retrofit applications
Parker Chomerics EMI-shielded touchscreens combine state-of-the- art touchscreen technologies (PCAP and Resistive) with Parker’s industry leading EMI-shielding capability.
Parker offers the widest range of specialty, industrial, hybrid and hydraulic hose in the industry. Our comprehensive line includes low pressure, medium pressure and high pressure pneumatic and hydraulic hoses that are resistant to heat, ozone, weather, chemicals, oil, flames, UV and abrasion. Parker is the largest hose manufacturer in the world and provides an engineered solution to all of your hose product needs.
Parker's comprehensive range of fittings and quick couplings will keep your application up and running with reliable-leak free connections that outperform in the toughest environments. No matter what your application, we have the fittings and couplings to help you avoid costly downtime.
Superior heat resistance (up to 500°F/260°C) coupled with excellent chemical resistance and lubricity have made fluoropolymer tubing one of the best products in the market place today.
TexLoc produces and stocks the largest selection of fluoroplastic tubing in the world. TexLoc also produces some of the smallest sizes of PTFE, FEP and ETFE convoluted tubing in the industry as well as the largest, from 1/8"/3.18mm inside diameter up to 4"/101.6mm inside diameter.
High temperature, chemical resistant resins make TexLoc heat shrink tubing ideal for harsh environments where chemicals and/or heat are present.
Tex-Flex FEP corrugated is an excellent electrical insulator and resists most strong corrosive liquids like hot acids. It is often used as an electrical or fluid conduit with robots that have flexible arms to deliver electrical wiring, air, or corrosive liquids.
